21" x 18" L Sealer with Conveyor

The Packshop L-Type Bar Sealer can wrap approximately 16 items per minute (depending on operator speed). This unit is suitable for Polyolefin and/or PVC shrink packaging materials. Once the operator places the product on the seal table, he begins the packaging process by pressing a dual push button system. Pneumatic pistons push down the seal bar and drive it up once the cycle is completed. Subsequently, the motorized conveyor system engages, which transports the product into an optional shrink tunnel. The seal bar may also be actuated automatically by switching the machine to the auto mode and adjusting the sealing time interval.

Features

• System suitable for Polyolefin, PVC.
• Simple to use with minimal operator training.
• Rugged all-metal construction.
• Achieve production speed of 0 to 16 ppm.
• Air Powered Pneumatic Piston.
• Compressed air 1.5 CFM @ 60 PSI
• Conveyor belt height varies a range of 2 Inches up and down.
• Maximum sealing dimensions: L 22 Inches (559 mm) x W 18 Inches (457 mm)
• Conveyor table height from floor (29 -32 Inches) / (737 mm - 813 mm). This height range allows machine integration with a variety of Shrink Tunnels.
• Equipped with a shrink film separator tray and work table for product preparation which moves back and forth to facilitate random pack size.
• Jaw safety switch on seling arm.
• Shrink Roll Base equipped with double Micro-Perforator.
• Maximum roll width machine can work with: 20 Inches (508 mm)
• Rolling casters and adjustable height feet. (Aprox. Range: 1 Inch)

Conveyor Belt Dimensions

• Length: 24 Inches (610 mm)
• Width: 16 1/2 Inches (420 mm)
• Movement Direction: Right to Left

Control Panel

• Main Power Switch.
• Emergency Stop Button
• On/Off Power Indicator light.
• Auto / Semi-auto Select Button.
• Impulse Sealing Timer (0-3 Sec).
• Conveyor Movement Length Timer (0-6 Sec).
• Automatic Mode Interval Timer (0-6 Sec)

Other Specifications

• Voltage 220VAC / 50-60Hz. 1 Phase
• Power 1.5 KW (2 HP).